Robin
.577 Tyrannosaur.
Ahhhhh, projecting again I see.
Robin
Robin
"Big Beautiful Bill" and Supressors?
- Thread starter Cavalry
- Start date
Loading…
www.congress.gov
Text of Bill, as proposed.
Does eliminate class 3 registration, and past records, but requires 4473/NICS check and a A MFG SERIAL NUMBER on the device for the NICS check.
Home made are not apparently going to be legal.
Senate, may have a different take.
spat
.700 Nitro Express
Where does it say no homemade ?
I can stamp a serial number as easy as the next guy.
Plus there's no NICS if it doesn't go through a dealer, so no need for one for that, anymore than any other 80%.
Hmm, that brings up the possibility of 80% suppressors..... "here's a bag of K-baffles and the end caps, you just need to drill them out for the caliber you choose, and supply some EMT conduit..."
Former Form 1 suppressor companies will be starting back up.
Bigfoot
.475 A&M Magnum
Absolutely, you're correct. This stuff isn't rocket science.
There's a track record to go by, and that track record says it all.
#SCOTUS Bruen / Hochul's CCIA
The bill, as written, clearly says that Suppressors will be treated as......FIREARMS.
Meaning a 4473 and NICS.
The Serial number must applied by a licensed FFL Mfg...........is required.
Ghost Guns, as we know from the SCOTUS Vanderstock Decision, and now Ghost Suppressors, too are apparently illegal, by this law.
Omission can be the same effect as a prohibition...if it does not say home made suppressors are legal, and it is not in the law as legal............ they are now considered by law, as Firearms, as written in the text.
"Home made" is not included for a purpose.............protects suppressor manufacturers.
Like Ghost Guns, that cannot be sold without a NICS and a new Serial Number, the suppressors are treated the same way.
Sorry, but I did not write it.
Meaning a 4473 and NICS.
The Serial number must applied by a licensed FFL Mfg...........is required.
Ghost Guns, as we know from the SCOTUS Vanderstock Decision, and now Ghost Suppressors, too are apparently illegal, by this law.
Omission can be the same effect as a prohibition...if it does not say home made suppressors are legal, and it is not in the law as legal............ they are now considered by law, as Firearms, as written in the text.
"Home made" is not included for a purpose.............protects suppressor manufacturers.
Like Ghost Guns, that cannot be sold without a NICS and a new Serial Number, the suppressors are treated the same way.
Sorry, but I did not write it.
Bustedknees
.308 Win
A dozen years ago I emptied my model 70 bolt action on running whitetail. I had it singing like a finely tuned auto loader. Five rounds of 7-08 caught the attention of two of my good local friends who enjoyed my less than fine deer dressing skills, they fed me fresh beer, helped load it into my atv too. This would've never been possible with a suppressed rifle. The moral of the story is loud guns = help and cold beer.
Ps.. if someone would ever make a flash enhancers (they must be legal because it's the opposite of flash suppressors) I would definitely buy some.
thughes
.44 mag
Cavalry
.308 Win
They have been out for quite some time. KAK and Nitro come to mind.
The motherfuckers that supplied the NY Legislature with the Bill they passed likely did.
Robin
.577 Tyrannosaur.
I got all kinds of licenses. Fishing ought to do.
Robin
Robin
This is not Europe where it has to be in the law to be legal. It has to be prohibited by law to make it illegal. Omit something in the law and it is legal until the law is changed. 80% frames/ receivers without serial numbers are not illegal to own or manufacture (Federal, In states like NY and CA they are) into guns and making a gun from a block of metal is not illegal either. If the words are not there then it is legal.
80% Lower Receivers Complete Guide & Facts | NAGR
Learn about 80% lower receivers, legal definitions, requirements & key info. Find out what makes these components unique in firearm construction at NAGR today!
gunrights.org
No, the GC Act of 1934, and as amended in 1968/86 specifically prohibits the possession of parts that can be used to create a suppressor and other weapons................this is not being changed...... that means home made is not going to be allowed.
SOLVENT TRAPS, OIL FILTERS, ETC.
The GC Act is not being changed except to remove suppressors from it, but still requires that a suppressor, that is NOW considered a firearm......HAS TO BE mfg by a licensed FFL MFG, WITH a serial number........... and a 4473/NICS IS required.
Ghost Suppressors will likely get you arrested, like most Ghost Guns going forward, after the Vanderstock SCOTUS decision.
FRT triggers and bump stocks were not specifically listed as controlled by the GCActs, and SCOTUS said that the law as written.....one bullet with each pull of the trigger IS LAW.. as written by Congress in the GCActs.
SOLVENT TRAPS, OIL FILTERS, ETC.
The GC Act is not being changed except to remove suppressors from it, but still requires that a suppressor, that is NOW considered a firearm......HAS TO BE mfg by a licensed FFL MFG, WITH a serial number........... and a 4473/NICS IS required.
Ghost Suppressors will likely get you arrested, like most Ghost Guns going forward, after the Vanderstock SCOTUS decision.
FRT triggers and bump stocks were not specifically listed as controlled by the GCActs, and SCOTUS said that the law as written.....one bullet with each pull of the trigger IS LAW.. as written by Congress in the GCActs.
spat
.700 Nitro Express
Cannot be sold without a serial number is a far cry from what we have now.
With this, it would be perfectly legal for me to just whip one up in my garage.
spat
.700 Nitro Express
4473 and NICS and a serial number are not required for a homemade gun.
In most of the US it's perfectly legal for me to build a rifle from scratch and never put a serial number on it, or even tell anyone it exists.
The SCOTUS ghost gun ruling was about selling kits. It says nothing about building guns.
You can buy a solid block of aluminum anywhere (even Amazon) and mill a receiver out of it without any legal impediments.
Everything else is just parts, and there isn't a practical way for them to ever change that. Unless they require a serial number and FFL for every piece of metal sold in the country.
Tell me that NYS does not monitor the sale of LPK's into NYS..........
Homemade suppressors, were specifically illegal to build..........GCAct of 1934.
Same, if this bill passes.
Home made guns were legal to make, until Vanderstock----that has changed the landscape for most people.
Homemade suppressors, were specifically illegal to build..........GCAct of 1934.
Same, if this bill passes.
Home made guns were legal to make, until Vanderstock----that has changed the landscape for most people.
spat
.700 Nitro Express
It's perfectly legal to make homemade suppressors, and has been forever.
Even machineguns were legal to make at home up until 1986.
You just have to file the paperwork and pay the tax.
If this bill removes the tax and the paperwork, then that's the only thing that changes.
An FFL and SOT are only required to be *in the business" of building things. If it's a hobby, for personal use, neither of them have ever been required.
AI
"What happens if you get caught with an unregistered suppressor?"
"Unlawful possession of a suppressor is considered a federal felony. This offense can lead to up to 10 years in prison and a $250,000 fine. The same penalties apply to unregistered suppressors or other NFA items. State laws differ, but many impose additional penalties. Nov 28, 2024"
Suppressors can be made at home from virgin parts..........a tax stamp has to be applied for and granted by the ATF first, and a serial number applied that is ATF approved...........few do it..........
Nothing really changes regarding home made.
"What happens if you get caught with an unregistered suppressor?"
"Unlawful possession of a suppressor is considered a federal felony. This offense can lead to up to 10 years in prison and a $250,000 fine. The same penalties apply to unregistered suppressors or other NFA items. State laws differ, but many impose additional penalties. Nov 28, 2024"
Suppressors can be made at home from virgin parts..........a tax stamp has to be applied for and granted by the ATF first, and a serial number applied that is ATF approved...........few do it..........
Nothing really changes regarding home made.
DoOver
.450/400 Nitro Ex
spat
.700 Nitro Express
Except, without the tax stamp, there's nothing required for you to *do*.
If they no longer have to be registered, because the tax no longer has to be paid, then all of that goes away.
What are you going to be charged with ?