A-8870 introduced
- Thread starter gunpoliticsny
- Start date
MothMan
.338 Win Mag
BMF JK
.44 mag
Will the 10s of thousands of existing “ghost guns” be grandfathered ? 
ArmedCorgi
.475 A&M Magnum
Acer-m14
20×102mm Vulcan
i still see it and can touch it .. its not a ghost ..
Acer-m14
20×102mm Vulcan
The bill requires sales go through a licensed dealer with background check done on the purchaser and requires the dealer keep records of such transfers. In addition, if there is no serial number on the frame, the dealer is required to add one which has been approved by FUAC
what about all them guns that were made with no numbers and you could buy at the hardware store and no NICS check .. ?? humm
what about all them guns that were made with no numbers and you could buy at the hardware store and no NICS check .. ?? humm
GOYABEAN
.950 JDJ
Well I guess I should order another 100 frames/ receivers before they pass the law.
libertysnake
.338 Win Mag
Vague as shit, in true NYS lawmaker fashion.
??
spat
.700 Nitro Express
the thing about something like this is that they could be made *so* cheaply and in such bulk that we could overwhelm the system.
What if I started selling "80% receivers" in bulk packs, 1000 of them for $50.
Make NY give you serial numbers for all of them.
Make them try to track a few million new guns.
Choke their system on volume.
We starved the beast of safe registrations. I bet we can do the opposite for these....
What if I started selling "80% receivers" in bulk packs, 1000 of them for $50.
Make NY give you serial numbers for all of them.
Make them try to track a few million new guns.
Choke their system on volume.
We starved the beast of safe registrations. I bet we can do the opposite for these....
Shadow rider
6.5 Creedmoor
I'll take $100 worth!
meketrefe
.450/400 Nitro Ex
Yeah! Close the home depot!!!
spat
.700 Nitro Express
Here are their 80% shotgun receivers.
Can make a slam fire 12ga out of these easier than finishing a 80% AR, that's for sure.
Everbilt 3/4 in. FIP Brass Cap Fitting 801989 - The Home Depot
Lead-Free Brass Pipe Cap from Everbilt prevents oil, liquid or gas leak from male pipe. Made of durable and corrosion resistant brass.
www.homedepot.com
Talked to my PP clerk about this bill today. She had heard nothing about it and really didn’t see the point to it. It just makes it harder for law abiding people who like to make their own stuff and put their own serial numbers on them.
Phazer
.450/400 Nitro Ex
Dealer will have to add the serial number? Really?
Ummm...I do not think that most dealers have the equipment to do that?
Ummm...I do not think that most dealers have the equipment to do that?
Phazer
.450/400 Nitro Ex
Someone once told me that AK receivers can be made with stamped an folded steel. If this is true, then does all sheet metal now have to be tracked with serial numbers?
Target
6.5 Creedmoor
Will the dealer need an FFL-07 ( manufacturer) level license to engrave the S/N?
FrankenCub
.338 Win Mag
There's videos on YouTube of AKs being made from spade shovels in Pakistan I think.
subsonic
.44 mag
Not to give these dumb fucks any ideas (not that they need it; they'll do what they'll do), but the text of this bill makes selling an "unfinished frame or receiver" (per its vague definition) an A misdemeanor in New York unless there is first a NICS check and it is serialized before it is sold.
It doesn't say anything about possession of unfinished or finished, unserialized frames, finishing a lawfully-possessed receiver yourself, or bringing them into the state when purchased out of state (though online sales to New York are covered).
It doesn't say anything about possession of unfinished or finished, unserialized frames, finishing a lawfully-possessed receiver yourself, or bringing them into the state when purchased out of state (though online sales to New York are covered).
