Herr Cuomo Kicks Off New Year with New Ban On All Gun Parts
- Thread starter maverick52
- Start date
Robin
.577 Tyrannosaur.
Well that just upped my time line. FUAC!
Robin
Robin
Jmac00
.475 A&M Magnum
so if I want a new trigger assembly for my lever gun, I have to go through a BGC??? LOL
so I order a 80% lower on line, have it shipped to a LGS, and I go pick it up? is there a NICS check for 80% lower? does the ATF even consider a 80% lower a firearm, that has a serial number?
so I order a 80% lower on line, have it shipped to a LGS, and I go pick it up? is there a NICS check for 80% lower? does the ATF even consider a 80% lower a firearm, that has a serial number?
Jmac00
.475 A&M Magnum
what if I order a 80% lower and have it shipped to a In-law or relative in a free state, then they ship the part to me? The part will no longer be coming from an on-line store? it would be a "gift" form an relative
or
I call my in-laws and have them order the part from out-of-state and have them ship it to me?
or
I call my in-laws and have them order the part from out-of-state and have them ship it to me?
fnfalguy
.308 Win
I for one would like to tell Mr. cuomo how much I appreciate his patronizing skillset. I was wondering how to best protect my family from those 80% gangs running amok in New York. Thankfully his finger is once again on the pulse of commonsense laws that all criminals will of course immediately abid by.
JFC I hate this state more and more each day
JFC I hate this state more and more each day
96coal449
.308 Win
Bigfoot
.475 A&M Magnum
FUAC
Deplorable Me
.700 Nitro Express
So much for ordering 10 round magazines.
SmallGameAddict
.308 Win
This is beyond ridiculous. The Federal government regulates interstate commerce. We all know the rules. A functioning receiver with a serial number, parts attached or no, is considered a firearm under Federal law, and a NICS check is required for transfer.
NO company is going to stamp all their parts with a serial number to satisfy these requirements. As already learned from the ammo portion of the SAFE Act, the Feds are not going to allow their NICS hotlines to be jammed up doing BGCs on items that aren't 'firearms', just because Governor Numbnuts says so.
You AR fans, gonna take your hit. So is everybody else, including yours truly. Barrels, stocks, who knows what else those idiots will cook up.
I am very tired of every single day, being bad news, living in this God-forsaken Democrat-controlled corrupt arm pit of a state. This is just a taste of what it would be like if the Democrat lunatics were in charge of the asylum (again) in good ole DC.
If I could move tomorrow, I'd be on it like white on rice. Unfortunately, my timeline is by 5/2021, which can't come soon enough. Thank God I'm older, and time flies.
NO company is going to stamp all their parts with a serial number to satisfy these requirements. As already learned from the ammo portion of the SAFE Act, the Feds are not going to allow their NICS hotlines to be jammed up doing BGCs on items that aren't 'firearms', just because Governor Numbnuts says so.
You AR fans, gonna take your hit. So is everybody else, including yours truly. Barrels, stocks, who knows what else those idiots will cook up.
I am very tired of every single day, being bad news, living in this God-forsaken Democrat-controlled corrupt arm pit of a state. This is just a taste of what it would be like if the Democrat lunatics were in charge of the asylum (again) in good ole DC.
If I could move tomorrow, I'd be on it like white on rice. Unfortunately, my timeline is by 5/2021, which can't come soon enough. Thank God I'm older, and time flies.
Cavalry
.338 Win Mag
The feds recently went though the whole debacle of the serialized part with AR's. Seems that a lower is not a receiver federally.
Is there a bill that goes along with this propaganda? I'm curios if they wrote in any penalties for possession, what "major components" are and how exactly they are going to define unfinished since the ATF will not other than yea or nay. Oh yeah, the more ambiguous, the better. The 80% companies need to change their advertising from 80% to "paperweight"
Is there a bill that goes along with this propaganda? I'm curios if they wrote in any penalties for possession, what "major components" are and how exactly they are going to define unfinished since the ATF will not other than yea or nay. Oh yeah, the more ambiguous, the better. The 80% companies need to change their advertising from 80% to "paperweight"
Deplorable Me
.700 Nitro Express
GTN
.308 Win
Is there a list of specific parts that are banned from being shipped in?
Is it all parts?
or are we just suppose know?
Is it all parts?
or are we just suppose know?
Bananabandit
.338 Win Mag
you mean you dont know?
GTN
.308 Win
lol nope!
Actually my question was kind of a serious question with a little bit of sarcasm thrown in also.
Most people are gonna think that this new crap is aimed at AR rifles but if the answer is all parts won’t the fudds be surprised when they order a new choke for their shotgun
Yes mistress.
Bananabandit
.338 Win Mag
Robin
.577 Tyrannosaur.
Is this shit already in effect? Actual law? Is NY a separate country? WTF?
Robin
Robin
SmallGameAddict
.308 Win
A) Not yet
B) At this point, a proposal by Captain F-Tard
C) No, but Cuomo is trying desperately to turn it into his own banana republic
maverick52
.223 Rem
Connecticut is looking better every day. Cheaper taxes and gun laws are not as bad. I’d rather commute to work than continue to live under this POS dictator.
When CT (the Unconstitutional State) looks better than NY, you know we are well and truly fucked.
96coal449
.308 Win
I am truly happy for you. Lets hope in the meantime and while you are there, the Kentuckians flush out the blue. Hopefully they are noting the growing crisis.
What a tantrum throwing puss face.
FUAC
Thank you Darth, I needed that.Amen
John Stark
.44 mag
Scuttlebutt is that for rifles and shotguns it will potentially be receivers (so for ARs and other patterns like that it will be lowers AND uppers), along with barrels.
Pistols will be slides and frames, maybe barrels too.
That will kill the entire "unfinished" or 80% market as well as the aftermarket "parts" market even for "legal" (read: serialized) rifles, shotguns, and pistols, because manufacturers are simply not going to cater to NY gun laws and serialize everything.
Making it so no one can get an unserialized part is a feature, not a bug with this legislation.
Now there are companies that do serialize lowers for CA; however, no one should depend on that for NY because we're talking about "parts" that are not firearms according to the ATF (and there is a wide open dispute right now whether lowers for an AR or other guns that have a lower and upper rather than one single receiver are even "firearms" right now due to ATFs own rules and definitions). Manufacturers are not going to want to retool to put serial numnbers on uppers, barrels, and who knows what just for NY, when those parts aren't even considered "firearms" by the ATF.
With a stroke of the pen the red diaper baby in Albany will outlaw the innovation and freedom that Americans have had since day one: to make, improve, and invent new Arms for themselves.
Better get cozy with your FFL, because when this goes through that's the only way you'll be getting a gun in NY. Even if other parts end up not falling under this, say a trigger replacement, that does nothing for the DYI crowd that is snapping up 80% stuff in all of the restricted states.
Welcome to NJ.
96coal449
.308 Win
Illegals need jobs too, ( I think). There are always hand stamps.
Jmac00
.475 A&M Magnum
well, as usual, I can just go to another state and buy whatever I need. I frequently go out of state to visit friends and family, so for me, its no big deal. It maybe a few months between builds, but it's just another excuse to go visit friends.
so I wonder how they are going to serialize things like plastic stocks (to replace a wood stock), forearm grips, Scopes, peep sites, trigger groups?
and what law would be broken if, while Im out of state, I buy a 80% lower and ship it to friend??? Im not a manufacturer or a dealer. fuck'em
so I wonder how they are going to serialize things like plastic stocks (to replace a wood stock), forearm grips, Scopes, peep sites, trigger groups?
and what law would be broken if, while Im out of state, I buy a 80% lower and ship it to friend??? Im not a manufacturer or a dealer. fuck'em
96coal449
.308 Win
There needs to be a gun show held in Alb at the capital.
I can see his face turning beat red.
FUAC
I can see his face turning beat red.
FUAC
MothMan
.338 Win Mag
Just refused by 3 different vendors for "gun parts" finally got what I wanted from AR 15 Parts
GTN
.308 Win
What were the venders that refused?
holdover
.475 A&M Magnum
THIS IS NEW YORK! YOUR LOGIC HAS NO POWER HERE!!
STS556
.223 Rem
I think I know whats going on here. The gun shops in PA have a deal with asshole cuomo to make the most ridiculous gun laws he can think of so we have no choice to make a run to PA to buy parts and ammo.
Acer-m14
20×102mm Vulcan
i bet Midway USA is one .. they wont even send a BP rifle to a FFL here .. and that's the FFL calling them to order it ..