Mini 14 w/ flash suppressor

[RugerRell]

I recently purchased a Ruger Mini 14 from a store. This version to be exact Ruger® Mini-14® Tactical Rifle Autoloading Rifle Model 5819
There is a chiseled X half on the barrel, half on the flash suppressor. I assume so someone would know if I were to remove it as there would be half an X left only on the barrel. There might be glue holding it to the threads as well, I’m not 100% sure. I’m confused about the legality of this. As far as I know one of the banned features is a flash suppressor. It was my first gun purchase and I was foolishly intimidated by the whole process and didn’t ask any questions. Is this a common practice to make the gun compliant? Or maybe they swapped the flash hider with a mock one I’ve heard about. Although it looks like the one in the link above. Thanks in advance for any help. I look forward to learning more and being a member of this forum.

 

[4WHLDRFTN]

is the mag fixed ?

 

[RugerRell]

is the mag fixed ?

No

 

[4WHLDRFTN]

its good no pistol grip

 

[That_FNG]

Flash suppressor on semi auto with detachable mag is no go with safe act

 

[RugerRell]

Flash suppressor on semi auto with detachable mag is no go with safe act

That’s what I thought. Maybe it’s not the same as the factory one in the picture. I’m going to give them a call this week. Is a pinned, welded or say red loctite thread protector over a threaded barrel safe act compliant?

 

[4WHLDRFTN]

That’s what I thought. Maybe it’s not the same as the factory one in the picture. I’m going to give them a call this week. Is a pinned, welded or say red loctite thread protector over a threaded barrel safe act compliant?

the mag needs to be fixed .. if you remove the flash, the thread protector needs to be pinned,, not loctied

 

[Vapor]

That’s what I thought. Maybe it’s not the same as the factory one in the picture. I’m going to give them a call this week. Is a pinned, welded or say red loctite thread protector over a threaded barrel safe act compliant?

Maybe.


The law is vague. There is no definition in the safe act for what constitutes removed threads

Tell your dealer to get you a ranch rifle if possible, or a refund.

 

[That_FNG]

That’s what I thought. Maybe it’s not the same as the factory one in the picture. I’m going to give them a call this week. Is a pinned, welded or say red loctite thread protector over a threaded barrel safe act compliant?

The wording of the law says flash hider, compensator and muzzle break. If you have other muzzle device you are fine.

 

[Robin]

FUAC!
Robin

 

[togmaster]

A lot of bad information in this thread. First off who sold you the mini in this state?

 

[technicalgadget]

There are some mini 14 specific fake flash hiders available in the market. Close up pics of the muzzle device would be helpful in making a determination.

In stock: > <link rel=

www.galatiinternational.com

 

[togmaster]

There are some mini 14 specific fake flash hiders available in the market. Close up pics of the muzzle device would be helpful in making a determination.

In stock: > <link rel=

www.galatiinternational.com

This is what I am thinking.

 

[Spookyscarey]

Get it pinned and welded, problem solved?

 

[dwa12479]

Its quite simple. A semi-auto with a detachable magazine and ANY ONE of the banned features is a no go for legality in NY. Banned features are linked below. IF the flash hider is real, then it's illegal in NYorkistan.

https://www.google.com/url?sa=t&sou...FjACegQIEhAB&usg=AOvVaw2CmQKdMjrGEJw_twtHZZcW

 

[dwa12479]

Get it pinned and welded, problem solved?

No.

This is commonly used to satisfy the ATF on muzzle devices that are on barrels shorter than 16", but the device brings it over. 16" is the shortest legal rifle barrel outside the NFA.

 

[4WHLDRFTN]

if you have a fake flash or thread protector (must be pinned) its good to go with rifle stock .
if its a real flash, either change it or fix the mag .

 

[dwa12479]

if you have a fake flash or thread protector (must be pinned) its good to go with rifle stock .
if its a real flash, either change it or fix the mag .

I'm not overly experienced with the Mini platform. Is there a good way to fix the mag and breach load it? It's not like an AR that you can separate the lower.

 

[Vapor]

I'm not overly experienced with the Mini platform. Is there a good way to fix the mag and breach load it? It's not like an AR that you can separate the lower.

There is a stripper clip guide that can be put on the bolt, but really it's a bunch of hassle for. .223 to keep a flash suppressor. If his dealer sold him one, he should make it right and get him a ranch which is no questions asked safe act legal and fully functional.


Stripper clips suck donkey penis. They were obsolete by the end of world war 2 at the latest.

 

[ArmedCorgi]

I'm not overly experienced with the Mini platform. Is there a good way to fix the mag and breach load it? It's not like an AR that you can separate the lower.

Yes. It's actually much easier with the right adaptor.
Mini-14 Clip Guide 582 or Higher

 

[dwa12479]

There is a stripper clip guide that can be put on the bolt, but really it's a bunch of hassle for. .223 to keep a flash suppressor. If his dealer sold him one, he should make it right and get him a ranch which is no questions asked safe act legal and fully functional.


Stripper clips suck donkey penis. They were obsolete by the end of world war 2 at the latest.

Agreed 100%, I hate stripper cilps.

 

[togmaster]

Get it pinned and welded, problem solved?

Wrong

 

[togmaster]

if you have a fake flash or thread protector (must be pinned) its good to go with rifle stock .
if its a real flash, either change it or fix the mag .

Swing and a miss.

 

[Spookyscarey]

No.

This is commonly used to satisfy the ATF on muzzle devices that are on barrels shorter than 16", but the device brings it over. 16" is the shortest legal rifle barrel outside the NFA.

Well thanks for explaining why instead of just saying wrong, hence the question mark on my statement. Learned something today about the mini-14

 

[togmaster]

Well thanks for explaining why instead of just saying wrong, hence the question mark on my statement. Learned something today about the mini-14

You're welcome.

 

[Vapor]

Like I said, there is no definition in the safe act for what constitutes destroyed or removed threads. Yes, some of us pin and weld, and no one has been prosecuted for such. Still, it's a silly risk here to take becuase Ruger makes a great functional ranch rifle.

 

[4WHLDRFTN]

Swing and a miss.

and why is that

 

[togmaster]

and why is that

The must be pinned opinion of yours.

 

[4WHLDRFTN]

The must be pinned opinion of yours.

apparently not just mine

threaded barrel

I live in long island new york and I'm not 100% sure how the laws are here when buying a threaded barrel I have all non-threaded right now but id like to purchase a threaded. can i have some insight?

nygunforum.com

 

[ArmedCorgi]

apparently not just mine

threaded barrel

I live in long island new york and I'm not 100% sure how the laws are here when buying a threaded barrel I have all non-threaded right now but id like to purchase a threaded. can i have some insight?

nygunforum.com

Pinning a flash hider to the barrel doesn't make it not a flash hider. It's still a banned feature unless the gun doesn't have a detachable magazine. Which would make pinning it pointless. But what will hold up in court for a fixed mag on a rife that wasn't originally designed for it, no one knows.