Search results

My old trusty Bostitch stick nailer croaked. Too many broken parts to rebuild it. Anyone have a used, functional Bostitch stick nailer they'd part with? I'm in Pleasantville and will drive a half hour or meet you halfway. Figured I'd try here before buying a new one, as I really don't use it...

Out of stock....but thanks..what was the price?

Thanks

Nice piece. How's the bottom of the magazine marked?

Almost positive the factory Ishapore mags held 12 rounds of 308/7.62. You can tell an original because it has a small feed ramp on its front, by the bullet tip. This was put there when they made the jump from 303 to 308. Aftermarket mags are 10 rounders. If you have a 10 round mag, your GTG...

Beleive these took 12 in the mag. Had one years ago and regret selling it. Get the updated extractor spring, should you find an Ishy. A lot of these had weak or substandard field replacements.

Bump with big price reduction...

That's good news

Does the Burris co-witness or would you need a riser for a standard AR platform? Thanks

PM sent

It's yours. PM me your address and I'll get it in today's mail.

FNFALguy....I received the knife in fine shape. To reciprocate here at PIF.., here's a Weaver top mount #63B that fits Mossberg 640's and a bunch of Marlins. (See the front of bag for what it fits). Looks new or like new, with perfect screws.

Ah...the oldies...

Chevusa, any 22 rimfire on the shelves? Can't tell from the pics..

****price reduction to $399 shipped, or will trade even for 5 bricks of Remington Thunderbolts, or Golden Bullets, Blazer, etc, 22 HV ammo***** Here's a Sporterized Rem 03, rechambered in 7x57. Pinprick pitting ( and a bit worse in a place or two) on receiver. Caliber isn't marked so to be...

Easy to tell. The Sporter version had a front ramp sight that was integral with the barrel (swaged into it, and cannot be removed) also and most telling is the word "Sporting" stamped into magazine floorplate. Also the Sporting version had a nicely checkered stock with a slimmer profile than...

Had a like-new metric Belgian Match 50:00, that I bought from John Jovino gun shop in lower manhattan, the week before they were banned in the 5 boroughs. (Early 90's?).. paid $1600.. Kept it for many years. Used to literally draw a crowd when I brought it to Blue Mountain range. Sold it...

I've restored several of these over the years, and as far as getting the sights, you will probably have the best luck on EBay. Is it a 75 target or sporter.? if target, check this out... https://www.rimfirecentral.com/forums/showthread.php?t=891418

On it

FNFALguy...if you still have that Schrade knife with leather sheath, I'll take it. Will dig through my stuff and get something up on here's to reciprocate. PM me and LMK Thanks

*******off to EBay....no longer available ******* Made in Italy, FAS 604 .177 Target pellet pistol. Factory Ambidextrous target grip. ****This is not the current reproduction FAS 6004 by Chiappa, this is an original late 70's early 80's version**** This is a high-quality, single stroke...

Don't get to Long Island but I would drive down to Yonkers and meet ya if that helped.

******Trade made...done deal****** 2 of the boxes have the full 25 shells (Rem STS and a Federal) 1 Federal is missing one shell Win Super-X is missing 6. Will do an actual count, but an educated guess is like 90+ shells. All high brass but one box. Will trade for a brick of HV 22's like...

Bore condition? Thanks

I'm with Robin on the Mobil1. Clean with Hoppes, then lube with Mobil1. Working on the same quart for a few years now. Use it on every firearm I own. Even airguns.

Looks like the friend took one point blank in the lower abdomen. Hope he pulled through. Guy with the bullet in his gut stayed very calm. Smart move...Id probably be raining blows on the fucker that shot me...any more info on this?

PM sent

******Deal done....no longer available***** Brand new , never mounted on a rifle. Leupold 2x7x33 VX1 variable power scope, with all paperwork, and matching numbers on box and scope. Even comes with factory Leupold rubber bikini covers , factory manual and vinyl window sticker. Cannot be...

Tank ever been hydro'ed? If so what's the date? Thanks

*******OFF TO EBAY, NO LONGER AVAILABLE ******* Early classic American-Made pre-1963 Sheridan 5mm Silver Streak pellet rifle. Rear sight gone but replaced with clamp on mount and Bushnell Sportview with Duplex and adjustable objective (missing caps but works perfectly.) This rifle is over 57...

Have 800 Remington STS hulls, once or twice fired. Separated into 2 400-pc lots. ******1 box sold. Have 1 left****** $45 per box of 400....Free Shipping to lower 48 states only. USPS Priority Mail, large flat rate box. Payment by USPMO, cash or Paypal F&F. "I'll take it" via here, PM or...

Pm sent

If the 303 Brit is Boxer primed, I'll take the 20 pcs and the 50 pcs of 32-20. Please. (Also, if by 32wcf you mean 32-20 , I'll take that too.) LMK and thanks,

Back in the late 80's and all throughout the 90's, we used Georgia Arms, exclusively. Mail order ammo company that shipped everything to your door in new USGI Ammo cans. Still have a bunch from then. Website is a skeleton of what it used to be. They had "canned heat" bulk specials, (.223, .45...

The Duffle bag is right across from Tractor Supply in Patterson, NY. The end of Route 311 I think.

Man, I miss their show down the street...any word of it happening anytime soon?

PM me a list of what you're after.

Welcome aboard!!

"through the rails" Remington 700 action removal wrench I made a few years ago. Barrel in a tight vise, remove the bolt and trigger, and insert this tool. works like a charm and outside finish on receiver stays perfect.

Pod, that is very cool. Always had my eye on that model...

Man I think I need a cigarette after seeing that..

Follow up PM sent

PM sent

******OFF TO EBAY*****no longer available here. Had this for a while and it seldom gets used, due to me jumping into the PCP Airgun world. Anyway, its a Hy Score Model 801, in .22 caliber. Shoots any .22 cal pellets very well. Made in Germany, and it even has captured screws, like on a...

Ok. Thanks for the intel. Will mark this Done. Much appreciated, boys

Anyone have a lead-rated ladle they're not using? Must be between 4 and 6 ounce capacity. Thinking about trying my hand at some basic casting. Might be interested in whole casting setup ,if the price is right. I'm in mid-Westchester . PM or email: ds1911 (at) iCloud.com

My EDC. A 1990's early Spyderco Endura that I cut a " wave" into. Been through thick and thin with this knife and have it on as I type this. Very generous deal, Minderasr..

Oh....thought the headline meant this....

Yeah, The videos are very entertaining. Both C& Rsenal and Marks own Anvil vids. Gun Jesus, too.