I want yet another AR-15

[dsdmmat]

@GOPerfect check out www.chandlerhardwoods.com

 

[FrankenCub]

paint tends to burn off.

BBQ paint. The cama paint on mine is still looking good, stayed put so far.

The one I chose is under 20 bucks

Well that's cheap enough.

 

[BDinPutnam]

The one I chose is under 20 bucks

It should be.

Nice handguards you picked out there, btw.

 

[GOPerfect]

@GOPerfect check out www.chandlerhardwoods.com

Wow, Great prices !!

 

[dsdmmat]

Wow, Great prices !!

I have bought several of their receivers and handguards, they sell good stuff. did you see the 3 piece AR10 set? might be good to put one away for a rainy day.

 

[Calculon]

The AR 10 set is by Matrix. I have a matrix set on my AR9. Great fit and finish.

 

[Robin]

I wish I could make an 80% complete. I really want a non serialized AR

Robin

 

[spat]

I wish I could make an 80% complete. I really want a non serialized AR

They aren't that difficult. Jig does most of the work.

 

[BDinPutnam]

Man this thread has me itching to do a build. Might be time to order the last 2 parts I need for another .223 Wylde- all I need is a mid/rifle handguard and stripped upper.

And @dsdmmat your endorsement carries a lot of weight, I may finally have to finally break down and do a '10 - if I can find someone to transfer the lower for me. Probably wait until May for that.

Sorry for momentary hijack!

 

[dsdmmat]

Man this thread has me itching to do a build. Might be time to order the last 2 parts I need for another .223 Wylde- all I need is a mid/rifle handguard and stripped upper.

And @dsdmmat your endorsement carries a lot of weight, I may finally have to finally break down and do a '10 - if I can find someone to transfer the lower for me. Probably wait until May for that.

Sorry for momentary hijack!

The matrix takes a Armalite lower parts kit. The takedown pins, bolt stop and rear detent spring are different than the DPMS. There is a place in Florida I got my parts from. I will find a link.

 

[BDinPutnam]

The matrix takes a Armalight lower parts kit. The takedown pins, bolt stop and rear detent spring are different than the DPMS. There is a place in Florida I got my parts from. I will find a link.

I'll try to resurrect an appropriate thread.

 

[dsdmmat]

I'll try to resurrect an appropriate thread.

The guy and place I got mine from is Chris at Central Florida Firearms. I will have to find link.
Here is the manufacturer website.

https://matrixarms.com/shop-all-products?olsPage=products

 

[dsdmmat]

Here is the link to my matrix build on the AR308 forum.

Matrix build

so I was going to build a straight pull bolt AR308 but my barrel would not have a thick enough shank after all the work would have been done. Now I have a matrix set upper and lower with handguard on the way. Should be here Friday. I have some concerns about the forward assist as I have read peop...

forum.308ar.com

 

[Tisto]

Besides Geissele, anyone know of any manufacture for good triggers that fit a large pin Colt?

Not positive they still do, but J P ENTERPRISES INC used to make them. Worth a try.

 

[Tisto]

I wish I could make an 80% complete. I really want a non serialized AR

That's a little more challenging than a straight-up assembly, but it really isn't that difficult. You pay for it though... your stripped Anderson lower sells for +/- $ 45. To cut your own will cost you +/- $ 200 or more. Jig, end mills, 80% lower, and you need a good drill press or milling machine, calipers, and time. Also, expect to F' k up your first one. Now, that being said, if you plan on building a bunch of your own lowers, it might be worth it.

Should you actually consider buying a jig and tooling, remember that not all jigs are created equal. I have used several different ones, and have developed a preference for one. I can tell you where to get end mills locally, too. PM me if you want info.

Oh, and keep in mind that if you make your own, MONKEY FACE WILL HATE YOU, CALL YOU EVIL, AND TURN YOU INTO A FELON WITH THE STROKE OF A PEN.

 

[Robin]

I wish I could make an 80% complete. I really want a non serialized AR

I personally know a guy that is willing to loan you his jig.
Robin

 

[Shadow rider]

Never built one before, not sure if I want to go that route.

I wish I was smart.

Kinda like playing with legos!

 

[Shadow rider]

I used this for my latest build ( with an 80% lower)...
I'm really diggin the side charging concept!

side charging complete upper

finished product (the one on the right)...

 

[Calculon]

I may or may not have been with someone who assembled 2 lowers last night in no time at all. Go for the build - I'm sure there are tools available if needed.

 

[alistair]

From another site;

5d Tactical 80% milling kit

Used 5d tactical milling kit for AR 80% lowers. Includes 5d kit (used for 1 aluminum lower). Mikita router (higher end routers work better than cheapos) Un-milled poly 80% lower. $220. Prefer a local sale but can ship for the right buyer. Located in WNY.

nyfirearms.com

 

[Calculon]

Don't feel like logging in. It's been years. Summary?

 

[GOPerfect]

Don't feel like logging in. It's been years. Summary?

Guy has a kit to finish 80% lowers.

 

[alistair]

Don't feel like logging in. It's been years. Summary?

Used 5d tactical milling kit for AR 80% lowers.

Includes 5d kit (used for 1 aluminum lower).
Mikita router (higher end routers work better than cheapos)
Un-milled poly 80% lower.

$220. Prefer a local sale but can ship for the right buyer. Located in WNY.

Attached Thumbnails

 

[Calculon]

Thanks gents.

 

[alistair]

I used this for my latest build ( with an 80% lower)...
I'm really diggin the side charging concept!

side charging complete upper

finished product (the one on the right)...

View attachment 67326

Look forward to hearing more about this upper. I am just about to buy one.

 

[Shadow rider]

80% is doable with a multi speed drill press (I use my Shopsmith) and a couple end mill bits and a cheap jig (mine was around $50 a few years back).

 

[GOPerfect]

Okay, all funding has been set and allocated. As soon as I finish pooping, I will begin to order the prices and parts needed!

 

[BDinPutnam]

Okay, all funding has been set and allocated. As soon as I finish pooping, I will begin to order the prices and parts needed!

Thanks for sharing!

 

[ArmedCorgi]

Okay, all funding has been set and allocated. As soon as I finish pooping, I will begin to order the prices and parts needed!

Hurry the fuck up!

 

[Robin]

Sent from the Kohler Bowl.
Robin