Looking For A Better Chamfer/Deburring Tool

[kev74]

Currently, I'm using one of these Lyman tools.



If anyone has any suggestions for something better, I'd appreciate it.

 

[fresch]

Same one I use.
Next step is a motorized station.

 

[Deplorable Me]

Same one I use.
Next step is a motorized station.

Something with multiple vertical tools to run primer pocket cleaner and external-internal deburring tools. Vertical shaft so the crap falls in an area that's contained and easy to clean.

With a little practice you can run a case in each hand, double tools, double production.

Concept idea:

 

[Phauxtoe]

I use this, but dont over do it!

 

[Mosinitis]

There are several setups that will trim, chamfer and deburr at the same time. Saves lots of work and time. It ranges from pricey Giraud to cheaper RCBS three-way cutter. I can't imagine going back to doing three operations separately.

Here is a picture of RCBS tool. The cutters are carbide, will stay sharp for a very long time.

 

[Mosinitis]

Cheaper Giraud

Giraud 3-Way Trimmer Works with a Power Drill « Daily Bulletin

Close-up of the Tri Way cutter with clear plastic chip guard removed. When you hear the name Giraud Tool you probably think of big, heavy, bench-top motor-driven trimmers. Well Giraud also offers a handy case trimmer/chamferer that works with a power drill (or other power source). Giraud's...

bulletin.accurateshooter.com

 

[Mosinitis]

Expensive Giraud (I own one)

You are being redirected...

 

[repete]

Something with multiple vertical tools to run primer pocket cleaner and external-internal deburring tools. Vertical shaft so the crap falls in an area that's contained and easy to clean.

With a little practice you can run a case in each hand, double tools, double production.

Concept idea:

View attachment 129246

I thought about getting one of these but was concerned about the brass shavings falling down and working there way into the motor.

 

[Carlos Hathcock]

I use this, but dont over do it!
View attachment 129253

Same one I use. Simple and effective. The shavings fall on the countertop and never get near to the sealed motor.

 

[JamieZ]

Same one I use. Simple and effective. The shavings fall on the countertop and never get near to the sealed motor.

Use the same,,, no worry at all about shavings getting into the motor. They fall on the table.

 

[RooftopKorean]

I use this, but dont over do it!
View attachment 129253

I use the same.

 

[Russ Woody]

https://www.amazon.com/Frankford-Arsenal-Platinum-Hardened-Scrapers/dp/B07796G2B1/ref=sr_1_4?dchild=1&keywords=frankford+arsenal+case+prep+center&qid=1633000469&sr=8-4

Here is the one I use. Works great.

 

[Robin]

This is what I use.

It requires beer as a lubricant and no other jobs be performed for at least six hours upon completion of the session.
Robin hic

 

[fresch]

This is what I use.
View attachment 129530
It requires beer as a lubricant and no other jobs be performed for at least six hours upon completion of the session.
Robin hic

My first one too.

 

[Mosinitis]

It's classic. Most people start out with one. I still keep it on the bench, to take care of some cases with poorly removed primer pocket crimp. Did some pluming work with it as well. Good for prepping small diameter copper pipes. Anything made by Wilson has a nice vintage look to it, even its packaging.

 

[Russ Woody]

I try to make sure all my stuff is 8-32 tpi so everything is interchangeable. I have a couple odd ball sizes that work with just a few tools

 

[Acer-m14]

i got this and love it .. no more hand cramps

https://www.amazon.com/Lyman-Case-Prep-Xpress-7810220/dp/B004TABTWU

 

[SmallGameAddict]

This is what I use.
View attachment 129530
It requires beer as a lubricant and no other jobs be performed for at least six hours upon completion of the session.
Robin hic

I like the way you think

 

[dwa12479]

i got this and love it .. no more hand cramps

https://www.amazon.com/Lyman-Case-Prep-Xpress-7810220/dp/B004TABTWU

Bought this same 6 or 7 years ago. Love it.

 

[timboy]

i got this and love it .. no more hand cramps

https://www.amazon.com/Lyman-Case-Prep-Xpress-7810220/dp/B004TABTWU

I'm looking to get into re loading I have some equipment already,I really like the looks if that one,having just had my carpal tunnels done this year the tool looks right up alley.

 

[meketrefe]

Thats what she said!