Don't really feel like cracking open my rifle every time , so I'll just take the few extra seconds it will take to load the mag loader.
New option for 'fixed mag' SAFE Act?
- Thread starter MikeyCNY
- Start date
STS556
.223 Rem
It takes a while to visit all the firearms stores in NY and go through each 4473 to see what type of firearm was bought. I bet in a couple of years after the goon squad has all the info they need about who bought an "other" type of firearm, the doors will be kicked in.
There is no "other" on the 4473,it simply asks what type of firearm was purchased , handgun or long gun.
GUNSICK
6.5 Creedmoor
There is.
Handgun, long gun or other.
<--------------- has purchased a lot of others!
Marine Cpl
.577 Tyrannosaur.
Those others could have been sold. They aren't registered.
Ok, I learned something.
MikeyCNY
6.5 Creedmoor
Boating accidents.
STS556
.223 Rem
"Other" means someone purchased an AR lower. It could be built as a pistol or rifle.
spat
.950 JDJ
But in NY, since SAFE, they would have had to go through another FFL to sell, so if they have a complete database from all the FFLs, they van get a decent idea who has them.
They can get a warrant to search for pot because your electric bill went up, don't think they couldn't do this....
Marine Cpl
.577 Tyrannosaur.
This is totally legal to do no matter what SAFE says.
Example. I go to a range in PA. Guy like my rifle. I say cool. It's yours for 800 bucks. We drive to the gunshop, pay the transfer fee and be on our ways.
spat
.950 JDJ
They will claim that that happens so infrequently that they have probable cause for a search warrant.
There are plenty of legal reasons your electric usage can go up too, but it doesnt stop them from getting warrants.
I've got a server and a couple routers running in a corner of my basement, If someone wanted I am sure they could get a thermal image, and an electric bill, and get a warrant to look for pot.
The 2nd amendment isn't the only one that is under assault.
Last edited:
FrankenCub
.338 Win Mag
They don't bother with electric bills around here, just a Blackhawk and thermals. Seen 'em doing it a couple years ago and a guy not too far from here got roped lol.
Pretty bad when you have to claim you broke your Other trying to assemble it and threw it out. Then I guess it better not be in your home.
Marine Cpl
.577 Tyrannosaur.
They can search all they want. What they cannot find, they cannot find. Sure. My safe is right here. In it you'll find a mini 14 and a few registered pistols.
Where's the other 2 pistols? I have them locked up out of state in my family's home. The rifles? Sold!
spat
.950 JDJ
Yep, after a pretty hefty lawyer bill, you'll get all of them back, eventually.
The only way to avoid the pain is to not end up on the radar to begin with. All the efforts at compliance do is get you a little lube when they screw you.
Marine Cpl
.577 Tyrannosaur.
This hypothetical situation is assuming they go after purchases marked "Other." I don't see it.
spat
.950 JDJ
You're right, it is a long shot now. But if someone told you "background checks for ammo" a few years ago you would have thought it was crazy too, and while they haven't completely materialized now they certainly seem a lot less far fetched.
in a SHTF would be a different scenario, for sure there would be no more mag lock.
yeah I'm thinking of getting some, maybe 10+ ? but I would like to read an up and personal review before getting it
Marine Cpl
.577 Tyrannosaur.
If your rifle has a normal ability to accept magazines and detach them, would you load one regular stripper clip as pictured below with loose rounds at the range and then load your magazine? Most wouldn't. Why with this device?
Most would however load a bunch of these stripper clips at home to save time at the range. For this to work, you need lots of them.
Just buying one or two is silly and counterproductive unless you are embarrassed to pull the rear pin, crack your upper shotgun style and reload.
So in essence, these are just 40 dollar stripper clips for fixed magazined rifles. You need many to get any benefit.
Most would however load a bunch of these stripper clips at home to save time at the range. For this to work, you need lots of them.
Just buying one or two is silly and counterproductive unless you are embarrassed to pull the rear pin, crack your upper shotgun style and reload.
So in essence, these are just 40 dollar stripper clips for fixed magazined rifles. You need many to get any benefit.
I sent an email last night at 8pm equesting a shipping update as they were supposed to ship by end of May. Got the following this morning at 5:47am. Hopefully this won't turn into another Walker Razor Ear muffs!
Good Morning Mr. Calculon,
We projected an availability date of May 25th-30th and we came very close to meeting it. We wanted the MA Loader product to be perfect and we believe we have achieved it. We are less than two weeks from shipping out your order.
I see your order in our system for fulfillment. We are very close to the finish line for all of our eager customers. We are manufacturing final production loaders right now. You will be receiving FREE shipping, you will be receiving our optional MA Feed Ramp and most importantly, your order will contain an additional MA Loader free of charge.
We appreciate your order and apologize for our delay. Because of the overwhelming response, we were required to expand our tooling/production capability to handle the demand. We were forced to make changes to increase our production capacity, which is why we have incurred a longer delay than anticipated. Your pre-order is scheduled to ship in early to mid-June.
It is important to all of us here at MEAN Arms that our customers are completely satisfied and understand you may not be willing to wait. If you choose to cancel your order, you will be refunded immediately. We encourage you to hold the excitement for just a bit longer.
We strive to provide a great customer experience and we believe our products will exceed your expectations. Again, we sincerely apologize for the delay and appreciate your patience. When your products ship, you will receive an e-mail confirmation.
Regards,
Tommy Lawson
--
Tommy
info@meanarms.com
www.MeanArms.com
Good Morning Mr. Calculon,
We projected an availability date of May 25th-30th and we came very close to meeting it. We wanted the MA Loader product to be perfect and we believe we have achieved it. We are less than two weeks from shipping out your order.
I see your order in our system for fulfillment. We are very close to the finish line for all of our eager customers. We are manufacturing final production loaders right now. You will be receiving FREE shipping, you will be receiving our optional MA Feed Ramp and most importantly, your order will contain an additional MA Loader free of charge.
We appreciate your order and apologize for our delay. Because of the overwhelming response, we were required to expand our tooling/production capability to handle the demand. We were forced to make changes to increase our production capacity, which is why we have incurred a longer delay than anticipated. Your pre-order is scheduled to ship in early to mid-June.
It is important to all of us here at MEAN Arms that our customers are completely satisfied and understand you may not be willing to wait. If you choose to cancel your order, you will be refunded immediately. We encourage you to hold the excitement for just a bit longer.
We strive to provide a great customer experience and we believe our products will exceed your expectations. Again, we sincerely apologize for the delay and appreciate your patience. When your products ship, you will receive an e-mail confirmation.
Regards,
Tommy Lawson
--
Tommy
info@meanarms.com
www.MeanArms.com
WTF !! A word for word email from the first ship date that came and went. The only difference is the month and date.
MikeyCNY
6.5 Creedmoor
Cool, I'm not worried. Haven't time to go to the range anyway. Need to sight in my new Primary Arms 1-6X Scope.
I wasn't aware of the update on their web site, but I did email them yesterday morning letting them know that I was none too happy about not receiving an email update from them since the second ship date has come and gone. I did suggest that if they weren't going to make good on their promises soon that I would have to consider contacting my states attorney general.
I received a rather dickey reply back this afternoon from "Tommy" accompanied by the statement posted on their site.
We'll see. I'm not going to hold my hand on my ass for much longer.
I received a rather dickey reply back this afternoon from "Tommy" accompanied by the statement posted on their site.
We'll see. I'm not going to hold my hand on my ass for much longer.
Duke
.357 mag
S&W have you been billed yet for the items???
Justincase
.308 Win
Beat me to it. Took me ten minutes to find this thread.
Duke
.357 mag
Got my ship notification....