Scope Rings?

dsdmmat · Jan 5, 2025

XTR Signature Rings™ | Burris Optics

www.burrisoptics.com

FP1201 · Jan 5, 2025

The Warne Rings (at least mounted to their Bases) are the tightest, best fitting of all I've used: (Leupold, Burris, Weaver, Redfield, Chineasium, etc.)
The Dovetail/Dual Dovetail Rings and Bases are mostly made by one company and repackaged for other Brand Names.
You've got a fine Rifle, well respected scope, don't cut corners now with cut-rate mounts, and as for steel v. aluminum: there isn't significant weight between the two, but Steel is much stronger than aluminum and less likely to deform.
Does your Rifle have Integrated Picatinny Scope Bases?
Understand that there IS a difference between the traditional "Weaver" Rings/Bases and "Picatinny" The difference being Weaver uses a round screw that will mount on Weaver and Picatinny Bases, but can/will move, where as Picatinny Rings have a square, keyed underside that closely fits the machined slots, they are also a slightly different size than Weaver.
Which, and whatever you choose, I strongly recommend making sure they say "Picatinny" and they'll be rock solid on the Rifle.

Tisto · Jan 5, 2025

Warne are always my first choice.

Vapor · Jan 5, 2025

I've had warne, Burris, weaver, Leupold, Bushnell, larue, seekins, TPS, etc.

Do yourself a favor. If you have the money go with TPS. Your choice if aluminum or steel. They are heads above the rest in precision. Seekins are probably just as nice, but heavier.

Warne is okay, but TPS is just way nicer. Follow the torque specs to the T.

There's an aluminum version that's a little light if you want that.

Scope Rings for Secure & Precise Optic Mounting | Brownells

Find your scope rings at Brownells for secure, precise mounting of your optic. Choose from 90 products, including top brands like LEUPOLD, WARNE MFG. COMPANY, and WEAVER, for reliable performance in any shooting scenario.

www.brownells.com

JunkBoxFull · Jan 5, 2025

MuttCat said:
Sold off a gun or two this summer and bough a new CZ 600 American in 308. And just ordered a Meopta scope to mount on a rail. All made in the Czech Republic...I went with a theme.

Anyway, now shopping for rings. The scope is a one inch tube with a 44mm objective. The rifle will see more time at the range than the woods.

Any suggestions? I've been looking at Warne and Vortex.

I`m assuming your CZ has a tapered barrel, not a fat target barrel. Go with Warne or Vortex in Medium height, should be good to go. Pay close attention to the torque specs set by the scope maker so that you don`t crush the scope tube. Your owners manual may give you the torque spec for the picatinny rail mounting screws. Warne will also have the rail torque specs too. Check rail screw depth so that you don`t interfere with cycling the bolt.

Robin · Jan 7, 2025

To quote a former sniper, you can have the best scope out there but if the rings suck so will the scope.
Robin

JunkBoxFull · Jan 7, 2025

MuttCat said:
Wow, lots of nice rings out there...crazy money for the better ones. I'm kind of leaning towards Warne.

Yup, they can get very pricey for better quality.
Most rings and bases i use are Warne. Damn good rings for the money. On my more expensive tools, i use Vortex or Seekins "matched" rings.

FP1201 · Jan 7, 2025

Vapor said:
I've had warne, Burris, weaver, Leupold, Bushnell, larue, seekins, TPS, etc.

Do yourself a favor. If you have the money go with TPS. Your choice if aluminum or steel. They are heads above the rest in precision. Seekins are probably just as nice, but heavier.

Warne is okay, but TPS is just way nicer. Follow the torque specs to the T.

There's an aluminum version that's a little light if you want that.

Scope Rings for Secure & Precise Optic Mounting | Brownells

Find your scope rings at Brownells for secure, precise mounting of your optic. Choose from 90 products, including top brands like LEUPOLD, WARNE MFG. COMPANY, and WEAVER, for reliable performance in any shooting scenario.

www.brownells.com

The TPS look like a cross between Leupold Mark 4 and Weaver Quad Mount Rings...Never heard of them, but would certainly try a set.
While I have nothing more than empirical observations, I wonder if there's one or two companies that actually manufacture Rings (with minor variances) and they are packaged by name Brand Optics Companies, and I don't mean the cheap, cheezy aluminum rings from Chy na.

Vapor · Jan 7, 2025

Sadly it looks like you are right. I better hold onto all of mine.

Another one I like is Talley. I have their rings on a vanguard with a vx-3.

FP1201 · Jan 7, 2025

MuttCat said:
Hey, good points all. Yes, tapered barrel. No sights, so I got a steel Picatinny (also made in Czechia) for scope mounting...the rear screws are longer than the front ones ( the receiver is patterned for Remington 700 stuff). Yup, medium height should work...and I'm thinking steel over aluminum.

I understand that the better Vortex rings are made by Seekins. Still waiting for the scope to arrive, got a good price on it and had to swoop.

Generally it's not a big deal as most Rifles are cared for, but remember that Steel and Aluminum are dissimilar metals and IF corrosion set in, it can be a very bad day.
Steel is typically more expensive and heavier, but not significantly.
Many makers offer "Economy" and "Premium" Rings under the Brand Name eg. Leupold has their "Rifleman" series that are inexpensive, Weaver design, and likely made overseas, where as Dovetail, QRW, etc. are Steel and noticeably better quality, so do yourself a favor and look, or research if you're really striving for the very best...Great guns deserve premium optics, and as pointed out shitty rings & bases may yield shitty results.

FWIW: I have a Tikka T3 in '06 and the Rings that came with it I would classify as a smidge better than chineasium, 1" (2) screw BUT the Receiver is Dovetail slotted and takes Rings made specifically for it....3~9x40 Sightron I has held up well enough so far, while my T3X-Tac a Vortex One Piece Ring Mount with a Sig Sierra 3BDX that's rock solid.

FRANKIE · Jan 8, 2025

Products - Smith Enterprise - Page 2

www.smithenterprise.com

Made in USA.
Handle military contracts. Real deal.
Got a set of US tactical EDM cut mounts some years back for a .50 BMG. Second to none. Takes a 1/2 socket to mount on rail. Heavy but they never move. Mounts will be much lighter for .308. Come with steel 30mm to 1”inch steel spacers.

Criticalt · Jan 8, 2025

Good information here, I have nothing to add.
I will say that scope rings are one thing you don't want to skimp on.
Bad rings can make a great scope worthless and great rings can make a bad scope serviceable.

Scope Rings?

.223 Rem

Donut Master

.338 Win Mag

.308 Win

.308 Win

.308 Win

.223 Rem

.223 Rem

.577 Tyrannosaur.

.308 Win

.338 Win Mag

.223 Rem

.308 Win

.338 Win Mag

.308 Win

.223 Rem

.338 Win Mag

.223 Rem

Order Summary​

1 Item​

1 x 501M Warne 1 inch, PA, Medium Matte Rings​

Order Summary

1 Item

1 x 501M Warne 1 inch, PA, Medium Matte Rings