Slide Milling for Optic

[alistair]

My aging eyes are telling me that I need to start using a red dot.
I don't want to buy a whole new gun or slide.
Can anyone recommend a company to mill an existing slide to access red dot?

 

[Acer-m14]

wish i could help .. bump

i cant see either .. with most pistol iron sites ..

i just point and shoot both eyes open ..

is just how i do it since i was a kid ..

even with a rifle and scope .. both eyes open most of the time ..

my friend or his wife gets a new pistol .. let me shoot it . 20 yrds im hitting the steel plate after a few shots

now im not shooting for a score to win .. just able to hit a 6 inch diameter target

 

[lrick]

Here are a couple threads on slide milling that are not very old.

https://nygunforum.com/threads/slide-milling-service-question.54459/

anyone know of a custom slide milling shop in NY

I need to get my slide milled for a Aimpoint Acro p2 red dot is there anyone in NY doing work on slides and was also looking into getting my frame stippled any suggestions would be great thank 's for the replies .

nygunforum.com

 

[Acer-m14]

Lets talk Red Dots on handguns

me personally i just cant get past Trijicon, yes there are a few others i would recommend with a caveat. and yes there are a lot of improvements coming out. (hell the trijicon RMR isnt even designed to be used on a pistol) here is one i have been semi hesitant to look at for myself but also...

nygunforum.com

 

[Jmac00]

my eyes are getting so bad, Im switching to grenade's

 

[togmaster]

Depends on which gun you want milled. Some shops only deal with certain brands. I've had 2 CZ's done by Jagerwerks and a Sig by ATEI. Both do excellent work. Lead time from Jagerwerks was much better than Atei.

 

[Phazer]

Battlewerx did a good job.

Optic Cuts, Slide Milling, and Optics for Glock

Glock slide milling and optic cuts allowing customers to mount red dot sights and enhance the performance of their firearm by Battle Werx.

www.battlewerx.com

 

[BMF JK]

Dynamic Weapon Solutions | Glock Replacement Parts and Accessories

Find the best Glocks replacement parts available when you shop online at Dynamic Weapon Solutions. Precuts, Slidecuts, Optic Cuts, Cerakotes, Barrels and more.

dynamicweaponsolutions.com

I have a precut slide from these guys for my g19 and love it . They have precuts or you can send them your slide .

 

[lrick]

Dynamic Weapon Solutions | Glock Replacement Parts and Accessories

Find the best Glocks replacement parts available when you shop online at Dynamic Weapon Solutions. Precuts, Slidecuts, Optic Cuts, Cerakotes, Barrels and more.

dynamicweaponsolutions.com

I have a precut slide from these guys for my g19 and love it . They have precuts or you can send them your slide .

Glad you had a good experience, but I've read too many horror stories about these guys to take the chance.

Too bad too, $80 for a 507k optic cut on a 43x and free Cerakote (standard colors) sounds like a great deal. Cheapest I've seen, but you get what you pay for. IMO paying more than that for a 43x doesn't make sense, might as well just get an MOS.

 

[Acer-m14]

my eyes are getting so bad, Im switching to grenade's

https://www.amazon.com/COOLSTEELANDBEYOND-Stainless-Vintage-Grenade-Necklace/dp/B07L3QTJVL/ref=sr_1_25_sspa?crid=1FHSCD3VX5RVA&keywords=grenade+necklace&qid=1674447565&sprefix=grenade+neckless%2Caps%2C160&sr=8-25-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzRldZRTM3TFQwS042JmVuY3J5cHRlZElkPUEwMTYyNzg3MlNOMzE1QVZHNTQwNCZlbmNyeXB0ZWRBZElkPUEwODg2NjA5MllIVk8xWjZUUDJNOCZ3aWRnZXROYW1lPXNwX210ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

 

[Jmac00]

https://www.amazon.com/COOLSTEELANDBEYOND-Stainless-Vintage-Grenade-Necklace/dp/B07L3QTJVL/ref=sr_1_25_sspa?crid=1FHSCD3VX5RVA&keywords=grenade+necklace&qid=1674447565&sprefix=grenade+neckless%2Caps%2C160&sr=8-25-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzRldZRTM3TFQwS042JmVuY3J5cHRlZElkPUEwMTYyNzg3MlNOMzE1QVZHNTQwNCZlbmNyeXB0ZWRBZElkPUEwODg2NjA5MllIVk8xWjZUUDJNOCZ3aWRnZXROYW1lPXNwX210ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

ooh good, they're cheaper than I thought

 

[BMF JK]

Glad you had a good experience, but I've read too many horror stories about these guys to take the chance.

Too bad too, $80 for a 507k optic cut on a 43x and free Cerakote (standard colors) sounds like a great deal. Cheapest I've seen, but you get what you pay for. IMO paying more than that for a 43x doesn't make sense, might as well just get an MOS.

Care to share these horror stories so OP can make an informed decision .

 

[lrick]

Care to share these horror stories so OP can make an informed decision .

To be fair I've also read they do some good work. Most of the complaints are about incorrect orders, unacceptable turnaround times, bad CS, etc, but not as much about the work itself. It seems to be a crap shoot. The info is out there freely available. Due diligence and then make a decision. But I'll indulge.

dynamic weapon solutions reviews at DuckDuckGo

DuckDuckGo. Privacy, Simplified.

duckduckgo.com

AVOID - DWS - 7 months nothing - DYNAMIC WEAPON SOLUTIONS - AVOID > Smith & Wesson > AR15.COM

See bottom of post for update.They look like the do great work, but wondering how they treated you? Turn around? etc.I always thought I would send it off to ATEI, but since they're leaving the 2.0 of

www.ar15.com

https://www.revdex.com/reviews/dynamic-weapon-solutions/l17037112

Dynamic Weapon Solutions - Huntington Beach, CA

Specialties: We specialize in Multi axis machining and cerakote. Building and customizing modern firearms such as glocks, M&P’s, Sig Sauer and Cz platforms. We sell Ar15 parts and accessories as well. We can even work and upgrade your shotguns or long range weapon systems. We’re also cerakote...

www.yelp.com

 

[BMF JK]

To be fair I've also read they do some good work. Most of the complaints are about incorrect orders, unacceptable turnaround times, bad CS, etc, but not as much about the work itself. It seems to be a crap shoot. The info is out there freely available. Due diligence and then make a decision. But I'll indulge.

dynamic weapon solutions reviews at DuckDuckGo

DuckDuckGo. Privacy, Simplified.

duckduckgo.com

AVOID - DWS - 7 months nothing - DYNAMIC WEAPON SOLUTIONS - AVOID > Smith & Wesson > AR15.COM

See bottom of post for update.They look like the do great work, but wondering how they treated you? Turn around? etc.I always thought I would send it off to ATEI, but since they're leaving the 2.0 of

www.ar15.com

https://www.revdex.com/reviews/dynamic-weapon-solutions/l17037112

Dynamic Weapon Solutions - Huntington Beach, CA

Specialties: We specialize in Multi axis machining and cerakote. Building and customizing modern firearms such as glocks, M&P’s, Sig Sauer and Cz platforms. We sell Ar15 parts and accessories as well. We can even work and upgrade your shotguns or long range weapon systems. We’re also cerakote...

www.yelp.com

View attachment 188213

I was very happy doing business with them and they do great work . My slide I ordered arrived in a timely manner and rmr fit perfect. If I were looking for a custom slide I’d buy from them again .
There are many companies that get slammed with orders and shipping isn’t as quick as we would expect. I have 1 holster company I buy from often , I expect a delay every time and it does suck but they make a great product so I deal with it .
By the way thanks for the research .

 

[speedkills27]

I sent mine to Primary Machine. They did a great job and I would recommended them. You can either buy the red dot from them or send them yours and they mill the slide for the dimensions of your actual sight as opposed to a generic dimension.

 

[lrick]

I was very happy doing business with them and they do great work . My slide I ordered arrived in a timely manner and rmr fit perfect. If I were looking for a custom slide I’d buy from them again .
There are many companies that get slammed with orders and shipping isn’t as quick as we would expect. I have 1 holster company I buy from often , I expect a delay every time and it does suck but they make a great product so I deal with it .
By the way thanks for the research .

No problem. I like to think we're all in this together and should help out as we can.

I might take a chance on a custom slide, but would hesitate on sending one in and taking a gun offline for as long as some have had. As long as you know what you might be getting into.

It seems they do really nice work, but are screwed up on the CS side of the house. I've read that Pedro's mom runs that end...and who has the heart to fire mom? Growing pains can be really tough for some companies to work through. I hope they do.

 

[lrick]

I've seen some good things about Nameless Armament. Two week turnaround times and great prices.
They have optic and cut packages available for select pistols. $340 for a 507k (507c for $360) with the cut (optic forward) looks like a good deal. At that price they only blue the cut pocket. $30 more to cerakote the pocket, $60 for the whole slide. They're in AZ...maybe @spat is familiar with them..? I have 2 pistols myself I may send their way.

Holosun 507K (Green Reticle) Optic and Cut Package | Nameless Armament

You asked for it! We are now expanding our Optic and Cut packages to many more pistols makes and models (see list below). Please read all points below: This product includes the Holosun 507K (Green Reticle) optic and machining for pistols listed in the configuration below. Price includes the...

www.namelessarms.com

 

[PutnamCharlie]

So I want my Dan Wesson cut for optics and they are too backed up to do it so who would you guys recommend for a 1911? My biggest thing would be to match the duty finish so it doesn't look like a two tone pistol.